How to connect TP-Link RE220 with any router?


 In order to remove WiFi dead zones, the RE220 AC750 Mesh WiFi Extender improves dual band WiFi throughout your home. To have continuous mesh coverage across your home, use the OneMesh router. TP-Link RE220 guide to install your wireless repeater by using a smartphone.

To connect the TP-Link RE220 AC750 to run the Tether App, follow the steps below:

1.On your smartphone, download and install the Tether App.

2. Connect your mobile device to the TP-Link RE220 WiFi network. 

3. Open the Tether App and select the “Setup New Device” option.

4. Select “TP-Link” from the list of router types.

5. Enter the security key or passphrase for the TP-Link RE220.

6. To finish the setup procedure, follow the directions displayed on screen.

7. Once the setup is complete, the TP-Link RE220  will be connected to the Tether App.

How can I set up TP-Link RE220 with WPS Setup?

WPS stands for Wi-Fi Protected Setup. It is a wireless networking standard that allows you to easily and securely add devices to your home network. WPS makes it easy to connect devices to your home network without having to access your router’s settings.

The TP-Link AC750 RE220 WPS Method which requires no personal data entry (username, password, SSID, etc.).

In this article, we’ll discuss how to connect your TP-Link RE220 using the WPS method.

Complete the TP-Link AC750 WPS by following the steps below.

1. Continue by using an Ethernet connection to link your router and modem together.

2. Plug in the router and switch it on after the connection has been made.

3. Find the router’s WPS button. It usually stands on the router’s side or back.

4. For a few seconds, press and hold the WPS button. When WPS mode is active, the router’s LED will begin to blink.

5. Look for the WPS button on your wireless device (laptop, tablet, etc.). 

6. For a few seconds, press and hold the WPS button. It should be automatic for the device to join the Wi-Fi network.

 7. When a wireless device connects to the router, the router’s LED should turn totally green.

How to update the latest firmware on my Tp-Link RE220 WIFI Extender AC750?

Bug fixes and new technology are included in firmware updates that enhance your family’s Wi-Fi experience overall. The security protection that updated router firmware offers is an additional important benefit.We are made aware of fresh threats to our internet security almost weekly.. This part contains the information about TP-Link RE220 firmware update procedure.

To update the firmware of your TP-Link RE220 Range Extender, you need to follow these steps:

1. From the TP-Link website, download the most recent firmware for your TP-Link RE220  Wifi Extender.

2. Login to the extender’s web-based settings page.

3. Select Firmware Upgrade under the System Tools menu.

4. Select the firmware file you downloaded by clicking Choose File.

5. Hold off till the extender gets completed upgrading. It can take a while to complete this.

6. The settings will be reset after the upgrading is finished. Change your settings as needed.

How to connect my TP-Link RE220 WIFI extender AC750?

The following are the steps  instructions for the TP-Link RE220:

  • Place your home Wi-Fi network close to the RE220  repeater.

  • A power outlet should be connected to the extension.

  • Watch for your TP RE220’s power light to first become amber and then solid green.

  • If the power LED is not glowing, press the power Button on/off.

  • When your extender is turned on, connect your wifi device to the TP-Link repeater network.

  • Visit after joining the network of the Extender.

  • The TP-Link RE220 installation instructions are on the screen.

How to reset Tp-Link Repeater? 

  • Power on the TP-Link Range Extender.

  •  Connect a computer to the TP-Link Range Extender with an Ethernet cable.

  •  Launch a web browser and type in or TP-Link Default IP address 

  •   Enter the username and password to the login page. 

  • Search Factory Defaults under System Tools.

  • Click the Restore button. 

  • Click the OK button to confirm. 

  • Your TP-Link Range Extender has now been reset to its factory defaults.

            Contact our chat support right now if you need any further assistance for TP-Link RE220


Leave A Reply

Your email address will not be published.